Will Hanna
Member
MBR/Fontana Engine/Parts Sale
Formerly campaigned by the late Ed Schmeekle. Been as quick as 5.28 in TAD trim.
MBR 477 CID Intake to pan
Engine that was in the car the last time it was raced. Block F-30. Has Barnes oil pump and the RCD billet front cover w/crank support and drives on it. Hogans Fabricated intake with billet runners. Latest MBR rocker assembly with crossover oiling. Intake to pan with valve covers minus fuel system and ignition - $20,000 (This motor is being inspected in my shop - can be reassembled to your specs)
MBR 477 CID Short Block
CN Block 067. RCD billet front cover w/crank support and drives. Complete short block with studs and oil pan. $12500 (This motor is being inspected in my shop - can be reassembled to your specs with any parts listed below)
Velasco 3.750 MBR/Chevy Crank - 10 runs - $2000
Accusump - $150
Olson oil pan - $275
Waterman Fuel System
Complete TAD fuel system minus hat and barrel valve with Waterman Little Bertha pump, all fuel lines, distribution blocks included. With whitey valve fuel management - $1500
MBR Oil Pan Gaskets (2) - $25 ea
RCD Blower Belt Guard for PSI - $100
MBR intake gaskets(3) - $5 ea
MBR copper header gaskets(4) - $30 ea
MBR 4.500 .072 Head Gaskets - clark (6) - 40 ea
MBR 4.500 .071 Head Gaskets - Hussey (1) - $40 ea
MBR 4.500 .062 Head Gaskets - Clark (6) - $40 ea
MBR 4.500 .051 Head Gaskets - Clark (4) - $40 ea
MBR 4.500 .050 Head Gaskets - Clark (4) - $40 ea
MBR 4.500 .045 Head Gaskets - Clark (1) - $40 ea
RCD Crank Trigger slider - half $20
RCD MSD/Racepak threaded pick up slider $30
PSI Old style snout (3.30" diameter) - $200
Used quill shaft (4.025" OAL) - $50
6 bolt 3.5" starter dog - $50
40t 8 mm GT blower pulley - $50
Waterman vane style fuel pump (needs repair) $350
Enderle Fuel Shutoff - 8 $50
Intake push rods 10 5/8 - $10 ea
Exhaust push rods 10 15/16 $10 ea
Blue stand rockers - complete side assembly $750 OBO
Blue rocker stands(5) - $50 ea OBO
Hogans intake w big PSI opening - $1500 (has some minor cracks in support gussets)
Fontana mag intake - short - $1200
Fontana mag intake - tall - $1200
MBR Rocker assembly gold stands - $2200
MBR cylinder heads - complete single plug (2 sets) $3000 set ready to bolt on minus vc studs
Taylor MBR engine diaper (2) - $500 ea
System 1 filter element - used - $50
XRP -12 oil line straight to 90 - 18.5" - new - $30
MBR cylinder heads - complete- dual plug $2400 for set ready to bolt on minus vc studs
Fontana cast front cover w pump/mag drive - SOLD
Barnes oil pump for cast cover - SOLD
RCD steel hub w damaged degree wheel - $25
RCD steel hub - $40
RCD 91t pulley - new - $150
RCD 91t pulley - used $100
Used Erson Cam w broken dowel - $250
PSI Conical Crank support w/ bolt - $100
MBR cylinder heads - complete -newer style (2 sets) - $4000 per set complete minus vc studs
RCD/Gates 1792-75-8mm PS belts - new - (5) $175 ea
MBR intake rockers - new (8) - $110 ea
MBR Exhaust rockers - new (7) - $120 ea
MBR Cylinder heads - bare - dual plug - $1700 set
GRP Rods - new 6.800 1.156 pin set of 8 - $960
GRP Rods - 5 runs 6.826 - set of 8 - $400
Victory intake valves - flat- low run bead (16) - $50 ea OBO
Victory exhaust valves - low run - bead (8) - $50 ea OBO
Arias pistons 4.500 job 440559 - new - (17) - $70 ea
Wrist pins - new 1.156 (15) - $25 ea
New Erson Cam R320-326 500 S4 - $450
Used buttons (several sets) - $150
Velasco 3.750 Crank - used rods/mains .010 under - $1000
Olson MBR Dragster Headers - repaired - $250 set
MBR Intake rockers - used (3) - $65 ea
MBR Exhaust rockers - used (12) - $75 ea
Fontana/Arais steel exhaust rockers (7) $50 ea
Fontana/Arais steel intake rockers (5) $50 ea
2" aluminum blower spacer for PSI Screw - $250
RCD Pump Extension - new - $400
Barnes oil pump - flange drive for billet -new - $695
RCD hub for billet cover/bearing support -new - $300
RCD hub for billet cover/bearing support -used - $150
Victory intake valves - dish- used - (10) $20 ea OBO
Victory intake valves - flat - used - (11) $20 ea OBO
Victory exhaust valves - used - flat (14) $20 ea OBO
Victory exhaust valve - new - flat $75
PAC 1353H Valve springs used (500-540 seat press) (5) - $15 ea
PAC 1353H Valve Springs - new (740 seat press) (16) - $25 ea
MBR intake push rods - new (3) $15 ea
MBR exhaust push rods - new (3) - $15 ea
PAC 1353H Valve springs - used (640 seat press) (8) - $15 ea
.904 Cam F/X Lifters (same as Chrysler Hemi) - 4 runs - (7) $20 ea
.904 Isky Lifters (same as Chrysler Hemi) - used - (7) $30 ea
.904 Morel Lifters (same as Chrysler Hemi) - used (set of 8) - $240
Clevite Main Bearing set new - MBR - PN MS829VXN - $95
Bin of enderle screw in jets/drop in nozzles (pic avail) - SALE PENDING
Bin of enderle screw in nozzles & checks (pic avail) - SALE PENDING
Hellfire Top Rings 4.500 - new (23) $16 ea ($255 a set of 8)
Hellfire Second Rings - new (15) $5 ea
RCD Blower Belt Guard for PSI screw - used (3) $85 ea
Fontana/MBR Burst panel cage/adaptor for intake (3) $50 ea
RCD idler bracket (for MBR/Chevy) - new w/ used pulley $600
RCD idler pulley w/ 8mm teeth - used $100
Throttle linkage arms w/ stops (3) $15 ea
Barrel valve turnbuckle $10
Bin Head studs/nuts - used - $200 for all (pic avail)
Manton 3/8 adjusters 5/16 ball - new (8) $10 ea
Bin used intake/exhaust push rods $150 for all (pic avail)
New MBR rocker shaft $80
RCD Fuel Pump drive shaft - new (2) $50 ea
RCD Billet oil pump clamp - new $100
Bin Valve train hardware $100 (pic avail)
Bin Engine studs/nuts $200 (pic avail)
Sealed Power Main Bearing set -.010 under - (2) $75 set
Clevite Lower Rod Bearing (V) Tray (30) -$165 for tray
Clevite Lower Rod Bearing (V) - (15) - $6 ea
Clevite Upper Rod Bearing (V) - (9) - $6 ea
Clevite Upper/Lower Rod bearing pairs -.010 (14 pair) $12 ea
Clevite Rod Bearing sets V (2 set) - $100/set
MBR Rear Main Seal - new - (2) $20
PSI Supercharger bearing - new - $20
25t 14 mm pulley - $40
25t 13.9 mm pulley $40
MBR 4.500 sleeve -new (3) $75 ea
86t 8mm pulley - used - $100
Taylor rear restraint bracket & pin (alum) - $30
Taylor rear blower restraint strap - new - $40
Blower restraints - used (lot) - $75 (pics avail)
Many pics available for text/email
Will Hanna
979.415.4959 (no calls/texts after 9 p.m. CST)
[email protected]
Formerly campaigned by the late Ed Schmeekle. Been as quick as 5.28 in TAD trim.
MBR 477 CID Intake to pan
Engine that was in the car the last time it was raced. Block F-30. Has Barnes oil pump and the RCD billet front cover w/crank support and drives on it. Hogans Fabricated intake with billet runners. Latest MBR rocker assembly with crossover oiling. Intake to pan with valve covers minus fuel system and ignition - $20,000 (This motor is being inspected in my shop - can be reassembled to your specs)
MBR 477 CID Short Block
CN Block 067. RCD billet front cover w/crank support and drives. Complete short block with studs and oil pan. $12500 (This motor is being inspected in my shop - can be reassembled to your specs with any parts listed below)
Velasco 3.750 MBR/Chevy Crank - 10 runs - $2000
Accusump - $150
Olson oil pan - $275
Waterman Fuel System
Complete TAD fuel system minus hat and barrel valve with Waterman Little Bertha pump, all fuel lines, distribution blocks included. With whitey valve fuel management - $1500
MBR Oil Pan Gaskets (2) - $25 ea
RCD Blower Belt Guard for PSI - $100
MBR intake gaskets(3) - $5 ea
MBR copper header gaskets(4) - $30 ea
MBR 4.500 .072 Head Gaskets - clark (6) - 40 ea
MBR 4.500 .071 Head Gaskets - Hussey (1) - $40 ea
MBR 4.500 .062 Head Gaskets - Clark (6) - $40 ea
MBR 4.500 .051 Head Gaskets - Clark (4) - $40 ea
MBR 4.500 .050 Head Gaskets - Clark (4) - $40 ea
MBR 4.500 .045 Head Gaskets - Clark (1) - $40 ea
RCD Crank Trigger slider - half $20
RCD MSD/Racepak threaded pick up slider $30
PSI Old style snout (3.30" diameter) - $200
Used quill shaft (4.025" OAL) - $50
6 bolt 3.5" starter dog - $50
40t 8 mm GT blower pulley - $50
Waterman vane style fuel pump (needs repair) $350
Enderle Fuel Shutoff - 8 $50
Intake push rods 10 5/8 - $10 ea
Exhaust push rods 10 15/16 $10 ea
Blue stand rockers - complete side assembly $750 OBO
Blue rocker stands(5) - $50 ea OBO
Hogans intake w big PSI opening - $1500 (has some minor cracks in support gussets)
Fontana mag intake - short - $1200
Fontana mag intake - tall - $1200
MBR Rocker assembly gold stands - $2200
MBR cylinder heads - complete single plug (2 sets) $3000 set ready to bolt on minus vc studs
Taylor MBR engine diaper (2) - $500 ea
System 1 filter element - used - $50
XRP -12 oil line straight to 90 - 18.5" - new - $30
MBR cylinder heads - complete- dual plug $2400 for set ready to bolt on minus vc studs
Fontana cast front cover w pump/mag drive - SOLD
Barnes oil pump for cast cover - SOLD
RCD steel hub w damaged degree wheel - $25
RCD steel hub - $40
RCD 91t pulley - new - $150
RCD 91t pulley - used $100
Used Erson Cam w broken dowel - $250
PSI Conical Crank support w/ bolt - $100
MBR cylinder heads - complete -newer style (2 sets) - $4000 per set complete minus vc studs
RCD/Gates 1792-75-8mm PS belts - new - (5) $175 ea
MBR intake rockers - new (8) - $110 ea
MBR Exhaust rockers - new (7) - $120 ea
MBR Cylinder heads - bare - dual plug - $1700 set
GRP Rods - new 6.800 1.156 pin set of 8 - $960
GRP Rods - 5 runs 6.826 - set of 8 - $400
Victory intake valves - flat- low run bead (16) - $50 ea OBO
Victory exhaust valves - low run - bead (8) - $50 ea OBO
Arias pistons 4.500 job 440559 - new - (17) - $70 ea
Wrist pins - new 1.156 (15) - $25 ea
New Erson Cam R320-326 500 S4 - $450
Used buttons (several sets) - $150
Velasco 3.750 Crank - used rods/mains .010 under - $1000
Olson MBR Dragster Headers - repaired - $250 set
MBR Intake rockers - used (3) - $65 ea
MBR Exhaust rockers - used (12) - $75 ea
Fontana/Arais steel exhaust rockers (7) $50 ea
Fontana/Arais steel intake rockers (5) $50 ea
2" aluminum blower spacer for PSI Screw - $250
RCD Pump Extension - new - $400
Barnes oil pump - flange drive for billet -new - $695
RCD hub for billet cover/bearing support -new - $300
RCD hub for billet cover/bearing support -used - $150
Victory intake valves - dish- used - (10) $20 ea OBO
Victory intake valves - flat - used - (11) $20 ea OBO
Victory exhaust valves - used - flat (14) $20 ea OBO
Victory exhaust valve - new - flat $75
PAC 1353H Valve springs used (500-540 seat press) (5) - $15 ea
PAC 1353H Valve Springs - new (740 seat press) (16) - $25 ea
MBR intake push rods - new (3) $15 ea
MBR exhaust push rods - new (3) - $15 ea
PAC 1353H Valve springs - used (640 seat press) (8) - $15 ea
.904 Cam F/X Lifters (same as Chrysler Hemi) - 4 runs - (7) $20 ea
.904 Isky Lifters (same as Chrysler Hemi) - used - (7) $30 ea
.904 Morel Lifters (same as Chrysler Hemi) - used (set of 8) - $240
Clevite Main Bearing set new - MBR - PN MS829VXN - $95
Bin of enderle screw in jets/drop in nozzles (pic avail) - SALE PENDING
Bin of enderle screw in nozzles & checks (pic avail) - SALE PENDING
Hellfire Top Rings 4.500 - new (23) $16 ea ($255 a set of 8)
Hellfire Second Rings - new (15) $5 ea
RCD Blower Belt Guard for PSI screw - used (3) $85 ea
Fontana/MBR Burst panel cage/adaptor for intake (3) $50 ea
RCD idler bracket (for MBR/Chevy) - new w/ used pulley $600
RCD idler pulley w/ 8mm teeth - used $100
Throttle linkage arms w/ stops (3) $15 ea
Barrel valve turnbuckle $10
Bin Head studs/nuts - used - $200 for all (pic avail)
Manton 3/8 adjusters 5/16 ball - new (8) $10 ea
Bin used intake/exhaust push rods $150 for all (pic avail)
New MBR rocker shaft $80
RCD Fuel Pump drive shaft - new (2) $50 ea
RCD Billet oil pump clamp - new $100
Bin Valve train hardware $100 (pic avail)
Bin Engine studs/nuts $200 (pic avail)
Sealed Power Main Bearing set -.010 under - (2) $75 set
Clevite Lower Rod Bearing (V) Tray (30) -$165 for tray
Clevite Lower Rod Bearing (V) - (15) - $6 ea
Clevite Upper Rod Bearing (V) - (9) - $6 ea
Clevite Upper/Lower Rod bearing pairs -.010 (14 pair) $12 ea
Clevite Rod Bearing sets V (2 set) - $100/set
MBR Rear Main Seal - new - (2) $20
PSI Supercharger bearing - new - $20
25t 14 mm pulley - $40
25t 13.9 mm pulley $40
MBR 4.500 sleeve -new (3) $75 ea
86t 8mm pulley - used - $100
Taylor rear restraint bracket & pin (alum) - $30
Taylor rear blower restraint strap - new - $40
Blower restraints - used (lot) - $75 (pics avail)
Many pics available for text/email
Will Hanna
979.415.4959 (no calls/texts after 9 p.m. CST)
[email protected]