Will Hanna
Member
TAD driveline/chassis part liquidation sale
Wheels/Chassis
System 1 Oil Filter - $150
Hoosier tubes (2) $50 ea
Spare dragster fuel tank (for Uyehara) - damaged - $100
Simpson Parachute - repaired from Simpson - $200
Stroud 5 point cam lock belts - $50
Clutch/Transmission
Lenco 3 speed 1.52 Low CS-2 Transmission. This unit is freshly inspected with 1.22 compound gearset with very low runs. 1.22/1.25 - $3500
Trick Titanium 8 1/8 Bellhousing complete with cross shaft, fork and bearing - $2200
CS-2 Input shaft for 8 1/8 - $100
Crower 10" big stand clutch - alum fly/cover, ti donut - $1200
Lenco 1.34 CS-1 Gear set used $600
Used discs/floaters for 10" (email for list of thicknesses) $250
Aluminum Donut - used - (2) $150 ea cut
Candlestick $70
Fork $55
Throwout bearing carrier $20
Aluminum 10" Big stand cover - used - $100
Acculab Gram Scale - $150
Bin of air fittings $10 (pic avail)
Bin of clutch weights $10 (pic avail)
Pilot bearing - used $5
Throwout Bearing - new - N1087 SKF $25
Pilot bearing - new (3) $15 ea
Pilot bearing for Chrisman rear - new $30
AFT 9 Finger Lock up pressure plate assembly $500 obo
Many pictures available for text/email
Will Hanna
979.415.4959 (no calls/texts after 9 p.m. CST)
[email protected]
Wheels/Chassis
System 1 Oil Filter - $150
Hoosier tubes (2) $50 ea
Spare dragster fuel tank (for Uyehara) - damaged - $100
Simpson Parachute - repaired from Simpson - $200
Stroud 5 point cam lock belts - $50
Clutch/Transmission
Lenco 3 speed 1.52 Low CS-2 Transmission. This unit is freshly inspected with 1.22 compound gearset with very low runs. 1.22/1.25 - $3500
Trick Titanium 8 1/8 Bellhousing complete with cross shaft, fork and bearing - $2200
CS-2 Input shaft for 8 1/8 - $100
Crower 10" big stand clutch - alum fly/cover, ti donut - $1200
Lenco 1.34 CS-1 Gear set used $600
Used discs/floaters for 10" (email for list of thicknesses) $250
Aluminum Donut - used - (2) $150 ea cut
Candlestick $70
Fork $55
Throwout bearing carrier $20
Aluminum 10" Big stand cover - used - $100
Acculab Gram Scale - $150
Bin of air fittings $10 (pic avail)
Bin of clutch weights $10 (pic avail)
Pilot bearing - used $5
Throwout Bearing - new - N1087 SKF $25
Pilot bearing - new (3) $15 ea
Pilot bearing for Chrisman rear - new $30
AFT 9 Finger Lock up pressure plate assembly $500 obo
Many pictures available for text/email
Will Hanna
979.415.4959 (no calls/texts after 9 p.m. CST)
[email protected]